​​DoC CE, EMC, RoHS Declaration of conformity X2 pro, X2 control, X2 marine , X2 web, Box 2 pro

​​DoC CE, EMC, RoHS Declaration of conformity

X2 pro, X2 control,  X2 marine, X2 web, Box2 pro

• DoC CE manufacturer declaration X2 promarine 1-08-2024.pdf

DNV Type Approval Certificate BoX2 pro BoX2 extreme

​DNV Type Approval Certificate BoX2 pro BoX2 extreme

• TAA000021B-revision2.pdf

BoX2 pro (SC), BoX2 extreme (SC) - ABS Type Approval Certificate

​ABS Type Approval Certificate for BoX2 pro (SC), BoX2 extreme (SC)

• BoX2 Extreme Pro_ABS TA Certificate_23-2483935-PDA_146169427 (PRODCERT - 2104419 - 1 - A1) - 1.PDF
• BoX2 Extreme Pro_ABS TA Certificate_23-2483935-PDA-DUP_146171611 (PRODCERT - 2104421 - 1 - A1) - 1.PDF

BoX2 pro (SC) / BoX2 extreme (SC) - BV certificate for

• 54567_B0 BV.pdf

BoX2 pro (SC) / BoX2 extreme (SC) DNV - GL Type Approval Certificate

​DNVGL Type Approval Certificate box2 pro, box2 extreme

• DNVGL Certificate BoX2 IoT Gateways (PROD CERT - 1382943 - 1 - A2) - 1.PDF

DoC battery X2 pro/marine

​DoC battery X2 pro/marine 

• BR2032_EDBD-B24006-01DoC.pdf

BoX2 pro (SC) / BoX2 extreme (SC), SAFE COMPASS DISTANCE INFORMATION,

​Compass safe distance BoX2

• Compass safe distance BoX2.pdf

BoX2 base v2 / pro (SC) (motion) / extreme (SC), Configuration and Image Manual, MAEN363

This manual replaces MAEN205 rev. D

• BoX2_Configuration_MAEN363_2024-05-02.pdf

Best Practice Image Update X2 HMI Panels 2.2, MAEN361 rev. B

• X2_Best_Practice_Image_Update_MAEN361B_2023-06-07.pdf.pdf

BoX2 pro (SC) Installation Manual, MAEN275

• BoX2_pro_MAEN275_English.pdf

X2 control / X2 marine SC / BoX2 pro SC image V2.0 b775 (Obsolete)

​Image release for X2 series Soft Control devices (acirro+ from production only).

Link to related documents:

Codesys runtime, 3.5.13.30 Patch7
https://www.beijerelectronics.com/en/support/Help___online?docId=68403

• MAEN205D_BoX2 Image Manual.pdf
• New LED information.PNG
• X2 LastMinuteNotes PIEN345I.pdf
• X2 ReleaseNotes PIEN344I.pdf
• X2_UpdateImage_SDcard.txt
• X2ImageLoader_build775.exe

X2 control / X2 marine SC / X2 extreme SC / BoX2 pro SC / BoX2 extreme SC CODESYS Runtime 3.5.13.30 Patch 7 (obsolete)

​CODESYS Runtime with individual device xml for every single X2 device.

X2/BoX2 series with CODESYS - Recommendations and limitations (SUEN00392)
https://www.beijerelectronics.com/en/support/Help___online?docId=68259

• CODESYS-3.5.13.30_7.zip

X2 control / X2 marine SC / BoX2 pro SC / BoX2 pro motion image V2.1.1 b906

Check on SmartStore for latest image version!

​Image supporting X2 control, X2 marine SC, BoX2 pro SC and BoX2 pro motion.

• BoX2 Image Manual MAEN205D.pdf
• X2 LastMinuteNotes 2.1.1.pdf
• X2 ReleaseNotes 2.1.1.pdf
• X2_UpdateImage_SDcard.txt
• X2ImageLoader_build906.exe

X2 control / BoX2 pro SC CODESYS Runtime 3.5.13.30 Patch 12 (Current version)

​SoftPLC runtime for X2 control 2.1.1 and later. Contains fixes for CmpPLCShell.

X2/BoX2 series with CODESYS - Recommendations and limitations (SUEN00392)
https://www.beijerelectronics.com/en/support/Help___online?docId=68259

• CoDeSys_3.5.13.30_12.zip
• Device XML.zip

BoX2 Erase / Delete Project with USB

The attached file is a .json that can be put on a USB stick and then plugged into a BoX2 to remove the project running on the device.

The following are the instructions on how to use it:

1. Put the attached json file in the root of an USB memory, it will be used to try delete the existing iX project on the BoX2 pro.
2. Plug the USB in while the BoX2 is running and wait until the LED turns red.
3. Remove the USB memory when the LED starts to flash purple and then reboot the BoX2.
4. When the BoX2 has booted the LED should flash purple which indicates that the unit is in standby and no iX project is running.
5. After this you should be able to transfer your iX project to the BoX2 from iX Developer.

• BoX2ConfigSet.zip

X2 control/BoX2 pro SC - CODESYS OPC UA server using encryption

​With the current* image/CODESYS release for X2 control/BoX2 pro SC then encyption feature is not supported. Only anonymous connections can be used.

*  
Image 2.1.1 b906 
CODESYS runtime 3.5.13.30_12

BCS Tools - SFC errors at compile

​Affected versions:
3.50, 3.51, 3.52
Will be solved in 3.60

Affected devices:
All devices in BCS Tools with <SP17 runtime.
BoX2 SC all variants
X2 control all variants
GL-99xx all variants
GN-93xx all variants

The reason for this is due to compatible issue between the runtime version implemented in the device and the version of the SFC library.

Workaround
Change the version in use to an older version according to the attached pictures.

• Screenshots_SFC.pdf

X2 control / X2 extreme SC / X2 marine SC / BoX2 pro SC / BoX2 extreme SC, firmware / systemprogram vs Codesys runtime version

10.03.2022
List of X2 firmware vs codesys runtime compiler etc.
Copied from this eminent document: SUEN00392D recommendations and limitations

Box2 Diagnostics, manual and LED

• BoX2 Manual .pdf
• Box2Diagnostics.zip
• Box2Diagnostics_vnc.zip
• ReadBox2Diagnostics_OPCUA.zip
• ReadBox2DiagnosticsModbusTCP.zip

X2 pro (SC) / X2 marine (SC) / X2 extreme (SC) / BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC), Battery replacement

17.oct.2018

General
X2 series operator terminals use Lithium batterys to  retain RTC data(Real Time Clock), and Persistent variables (battery backed variables), in terminals with onboard codesys PLC (control \ motion versions) (stored in SRAM)

PS Imortant:
When replacing the battery the SRAM storing the Codesys persisten variable will be wiped. To avoid loosing the settings, one need to use either the recipe feature in BCs tools \ codesys, or use the IX Recipe feature, to backup the data prior to battery replacement. The ix metode has the benefit that it can be handled without a computer. (althoug it needs to be pre-implemented in the IX project)

X2 Base: 
use a rechargable Lithium ion 200mA cell. (on print soldered)
Normaly not to be replaced. (need 48h to fully charge on startup)

X2 Extreme:
X2 extreme 7 & ( 12 V)  
BR2330A/GAN 3V 255mAh Non rechargable Button cell, Not user Replacable (soldered on print) 

All other extreme terminals use:
BR2477A/GAN 3V 1000mAh Non rechargable Button cell, Not user Replacable (soldered on print) 

​X2 Pro/Marine/control/ Motion:
BR2032 3V 200mAh Button Cell, non rechargable battery. User Replacable.
(remove backcover by unscrew the 4  torq screws ( T10) in each corner)

Lifetime:
The RTC current consumption is 3uA when power is off 
The SRAM current consumption is 1-2uA when power is off 

Lifetime depends on both temperature, and how much of the time the terminal is powered. 

A Standard X2 terminal with no SRAM (only RTC), charging 3uA when power is off should then last 200 000uAh : (3uA*24*365) = 7,6 years. (if never powered) (worst case is estimated to be = 5Years)

A Control terminal with SRAM the calculation would be: 
200 000uAh : (5uA*24*365) = 4,6 years. (if never powered) 

A standard terminal used 260 days\year 10h\day would last aprox 11 years.
200 000 : ((260days * 14hurs * 3uA) + (105days * 24hours * 3uA))

Warning:
When the Battery is due for replacement, a system warning dialogue will appear in the middle of the screen. This dialogue must be acknowledged to make it disapear. After a reboot the warning will occure again if the low battery condition remains.  


Some Details on lithium batterys
BR2032 brakes up to:
B - Positive electrode material (Carbon Monofluoride)
R - Round (shape)
20 - Diameter in mm
32 - Height in 1\10 mm = 3,2 mm

BR2032 vs CR2032:
Due to the differens in positive electrode material, BR cells self discharge slower than CR cells, (thus has longer "shelf time" (90% after 10 years)),  And has wider temp. range than CR  (-30 to +85 vs -20 to 70).
The voltage is tough the same (3V), and apart from the temp. spec. theese cells are compatible.

Box2 base / BoX2 pro (SC) / BoX2 extreme (SC), unknown IP \ reset \ reformat

​25.10.2019
IX 2.40SP4

If you have a BoX2, and do not know the IP of it, how can you then regain contoll of it?

- Port B in all X2 / BoX2 devices are default set to DHCP, so if lucky, you will find it by connecting the port B to a network with a DHCP service (e.g. your office)

- Secondary you need to create a new config file with the configuration software WARP, and then load this project (with known IP settings), from an USB stick. 

- The procedure on using WARP is described inn part 3.1.1 in the BoX2 manual attached, Beijer BoX2 Image Manual, User’s Guide, MAEN205 C
    

• BoX2 Manual .pdf

BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) LED indication

​24.10.2019

Status Diode of the Box2 has the following meaning:
Published in the box2 image manual 

• BoX2 Manual .pdf

3D drawing BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) in STEP format

​3D drawing box2 extreme in STEP format

• BoX2 basic_3D.STEP
• BoX2 extreme_3D.STEP
• BoX2 pro_3D.STEP

BoX2 pro (SC) / BoX2 extreme (SC) - MTBF summary

The purpose of this document is to determine the reliability prediction according to the Telcordia 3 standard for the BoX2 products.

Valid for BoX2 pro / BoX2 pro SC / BoX2 extreme / BoX2 extreme SC

• MTBF Summary -box2.pdf

SqlProxy - Connects iX Panels transparently to SQL Server

​There's sometimes a need to connect to SQL Server from an iX Panel.
In CE6 based panel, this has been possible using sqlclient.

Nothing similar is however supported in CE8 (most X2 panels).

During the years, we have helped customers creating solutions based on SQL Server connectivity.
There is a need to be able to move such an application to X2 aswell with minimal change of script code.

One solution is "SqlProxy" that is presented in the attached pdf file.
​
Download:
https://www.beijerelectronics.com/en/support/Help___online?code=4D4C0877-4291-43C8-BA7B-54A456B0B5FE
Install in e.g. C:\Users\Public\SqlProxy to avoid access right issues!

October 16, 2019: The file SqlProxy_191016C.zip contains CURRENT VERSION !
SqlProxy 1.1.0.1. Make sure to use corresponding SqlProxy.exe , tcpServer.dll and scmSqlProxy.Script.cs from the same package!
Supports unicode (e.g. Chinese characters and queries like select * from Customers where Name = N'公司黄页' ). Performance improved.

For best performance, limit the amount of data (number of rows and number of columns) to the minimum necessary with your SQL query. Example: "select top (1) createdTime, columnName3, columnName149 from tableName where columnName1 = 'something' order by createdTime desc"
to get just the few interesting columns from the very latest record where columnName1 = 'something'

Furthermore, for best performance, use StringBuilder when receiving reply from SqlProxy instead of += in the iX demo project. scmSqlProxy.Script_StringBuilder.zip in demo project contains this alternate scmProxy.Script.cs file if needed.
Contact support @beijer.se for additional info!

• SqlProxy_161202C.pdf
• SqlProxy_190115.pdf
• SqlProxy_191016C.zip
• SqlProxy_as_service_170330.pdf

BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) brochure BREN638 (english)

• Box2 brochure_180517_pages.pdf
• Box2 brochure_180517_spreads.pdf