M series distributed IO

For demanding applications

The M series is the natural choice for demanding applications in rugged environments with extreme temperatures, vibrations, etc. The M series features multiple certificates for marine and hazardous locations. Hot swap and redundancy makes the M series suitable for mission-critical applications, where continuous operation is crucial.

Upgrade a standard IO node to an advanced CODESYS-based control solution by simply replacing the network adapter with a CODESYS controller module and you will have a powerful compact controller solution.

The M series is the perfect choice of rugged high-end distributed IO.

 



Certified for demanding environments

Conforms to multiple certificates for marine and hazardous locations making the M series suitable for tough applications.

Hot swap capability

Plug in, plug out with removable terminal blocks without dismounting any wiring or shutting off power.

 


Redundant modes

Enables you to take advantage of redundancies for network and power modules for mission-critical applications.


Flexible build system

Combinations for single or redundant network module and power supply. Combined with installation friendly backplane connector and removable terminal block.



Full connectivity

Communicate effectively with other equipment or systems via widely used industrial communication protocols.

Advance to CODESYS control

Simply advance to CODESYS control by replacing the network adapter with a CODESYS controller module.





Find the building blocks for exactly the configuration you need


Network adapter modules

Communicate with other equipment or systems via several industrial communication protocols, such as MODBUS TCP/UDP, Ethernet/IP,  EtherCAT, PROFINET, PROFIBUS DP and CC-Link. Supporting redundancy of power modules when two are used, and hot swap capability of power modules and IO slices.

 

Learn more

CODESYS controller modules

Offer integrated IEC 61131-3 PLC functionality for rugged environments, with non-volatile memory, built-in network adapter, up to 63 expansion slices, Modbus TCP / RTU and Webvisu. Supporting redundancy of power modules when two are used, and hot swap capability of power modules and IO slices. 

 

Learn more


Digital input modules

Connect to your process with 24VDC, 120VAC and 240VAC input modules.
Digital input modules have 8 or 16 input channels.

 

Learn more

Digital output modules

Connect to your process with 24VDC/0.3/0.5A/2.0A, 110VDC/VAC/1.0A and 240VAC/2.0A. Digital output modules offer sink, source, relay or MOS relay outputs, with 4 to 16 output channels. 

 

Learn more


Analog input modules

Available with 8 or 16 channels, 12 or 16 Bits resolution depending on input module and signal type. Modules support everything from input current 0~20 / 4~20 / -20~20mA, input voltage 0~5 / -5~5 / 0~10 / -10~10VDC, RTD inputs (4~20mA) sensor type PT100 / PT1000 / Ni1000LG etc. and thermocouple versions for sensor types K / J / T / B etc. 

 

Learn more

Analog output modules

Voltage and current output types are available with 8 and 16 channels. Resolution with both 12 and 16 Bits depending on type of module. Modules supporting output current 0~20 / 4~20mA and output voltage 0~10 / -10~10V.

 

Learn more


Special modules

Special modules include communication serial interfaces for RS232, RS422 and RS485. TxD, RxD, full duplex on 300 ~ 115 200 bps, and HART interface. 

 

Learn more

Power modules

Power module for system and field distribution, supporting redundancy and hot swap capability.

 

Learn more



Perfected to extreme environments

The M series is perfect for demanding applications that depend on:

  • Extreme ambient temperatures (-25°C to +60°C)
    • UL/cUL operating temperature range
  • No air conditioning required in cabinet
    • Vertical and horizontal installation is available
  • Immunity to electromagnetic interference and impulse voltages
    • Industrial emissions EN 61000-6-4/A11 : 2011
    • Industrial immunity EN 61000-6-2 : 2019
  • Vibration resistance and shock resistance
    • Vibration resistance IEC 60068-2-6, 4g
    • DNVGL-CG-0339 (vibration class B, 4g) based on above IEC standard
  • Explosion protection (HazLoc & ATEX certification)
    • HazLoc Class 1 Div 2
    • ATEX Zone 2/22 (DEMKO 19 ATEX 2223X/DEMKO 20 ATEX 2373)
  • DNV GL and other marine classifications
    • Applicable tests according to class guideline DNVGL-CG-0339
  • Redundant communication and power supply

 



Fully certified

The M series modules will conform to CE, UL/cUL, UKCA, FCC, HAZLOC, ATEX, DNV GL, ABS, BV, LR, CCS and KR standards making the M series suitable for tough applications in industrial and marine environments and in hazardous locations.

For detailed information on certification, please refer to the specific module product pages.



Hot swap of IO modules

The M series gives you the possibility to replace modules with power on, providing smooth maintenance.

Redundant modes

The M series supports redundancies in both network and power modules, where continuous operation is vital.



Advance to CODESYS control

Upgrade to an advanced IEC 61131-3 CODESYS control solution simply by replacing the standard network adapter with a CODESYS controller module. A powerful CODESYS-based alternative to a traditional compact or modular PLC.

Take advantage of the BCS Tools programming platform to engineer powerful control applications.

 

Learn more about BCS Tools



Let's connect!

Take advantage of our experts to find the right solutions and products for your engineering challenges.

Contact support

Let's connect